Top Machinery Companies To Invest In 2014

Mike Kane/Bloomberg via Getty Images WASHINGTON -- Orders to U.S. factories fell in July by the sharpest amount in four months, held back by weaker demand for commercial aircraft and heavy machinery. A key category that reflects business investment plans also fell. Factory orders dropped 2.4 percent in July compared with June, when orders rose 1.6 percent, the Commerce Department reported Thursday. Orders for core capital goods, a category viewed as a proxy for business investment spending, fell 4 percent in July. Core capital goods are considered a good measure of businesses' confidence in the economy. They include items that point to expansion -- such as machinery, computers and heavy trucks -- while excluding volatile orders for aircraft and defense. The July setback was expected to be temporary. Orders for durable goods, items expected to last at least three years, declined 7.4 percent, a slightly bigger drop than the 7.3 percent fall estimated in a preliminary report last week. It was the biggest decline since a 12.9 percent fall in August 2012. Orders for nondurable goods, items such as chemicals, food and paper, rose 2.4 percent in July after a 0.5 percent decline in June. Excluding the volatile transportation category, factory goods orders were up 1.2 percent. The big drop in core capital goods orders suggests the third quarter is off to a weaker start than some had hoped. While economists cautioned that it's just one month of data, a few lowered their growth estimates for the July-September quarter after seeing the durable goods report. Some believe that growth may only come in around 1.9 percent for the current quarter, a drop from previous estimates of 2.5 percent growth. Overall manufacturing has slumped this year, hurt by weakness overseas that has dragged on U.S. exports. But there have been signs that factory activity could pick up in the second half of the year. But the Institute for Supply Management reported Tuesday that its closely watched gauge of manufacturing activity rose in August to a reading of 55.7, up from 55.4 in July. That was the highest level since June 2011 and offered encouragement that manufacturing may be starting to pull out of its slowdown. The economy expanded at an annual rate of 2.5 percent in the April-June quarter.

Top 5 Consumer Stocks To Buy For 2015: Boewe Systec AG (BSY)

BOEWE SYSTEC AG is a Germany-based provider of paper management systems. The Company is primarily engaged in the production of inserting systems, for the secure distribution of printed documents and plastic cards. Its product portfolio also includes plastic card personalization and mailing solutions, software for the monitoring and interconnection of various mailroom systems, paper processing solutions, sorting and mail verification systems, and scanners. The Company developed reading technologies used for cutters, cut sheet feeders, enclosure feeders and inserting systems, which are integrated into its software solutions. BOEWE SYSTEC AG�� products are modular, allowing machinery from different manufacturers to be connected into a production line, offering solutions for the automated mailroom. In addition, the Company provides installation, commissioning and maintenance services, as well as spare parts for its products. Advisors' Opinion:

• [By Inyoung Hwang]

  U.K. stocks erased losses in the last half hour of trading, leaving the FTSE 100 Index (UKX) little changed, as a rally in British Sky Broadcasting Group Plc (BSY) and SABMiller Plc (SAB) offset Dagong Global Credit Rating Co.�� downgrade of U.S. sovereign debt.

Top Machinery Companies To Invest In 2014: Esco Technologies Inc (ESE)

ESCO Technologies Inc. (ESCO), incorporated in August 1990, is a producer of engineered products and systems sold to customers worldwide, primarily for utility, industrial, aerospace and commercial applications. ESCO operates in three segments: Utility Solutions Group (Utility Solutions), RF Shielding and Test (Test) and Filtration/Fluid Flow (Filtration). On July 31, 2010, the Company acquired the capital stock of Crissair, Inc. On September 3, 2010, the Company acquired the capital stock of Xtensible Solutions, Inc. its subsidiaries include Aclara Power-Line Systems Inc. (Aclara PLS), Aclara RF Systems Inc. (Aclara RF), Aclara Software Inc., Doble Engineering Company, Doble Lemke AG, Doble Lemke GmbH, Doble PowerTest Limited, Doble TransiNor AS, Crissair, Inc., PTI Technologies Inc., TekPackaging LLC, VACCO Industries, Beijing Lindgren ElectronMagnetic Technology Co., Ltd., ETS-Lindgren L.P., ETS-Lindgren OY, ETS Lindgren Limited and ETS Lindgren Japan, Inc. In January 2013, the Company acquired the assets of Metrum Technologies LLC. In June 2013, ESCO Technologies Inc announced that it has acquired Canyon Engineering Products Inc.

UTILITY SOLUTIONS

The Utility Solutions segment accounted for approximately 57% of the Company�� total revenue during the fiscal year ended September 30, 2010 (fiscal 2010). Aclara PLS is a manufacturer of two-way power line communication systems for the electric utility industry (the TWACS systems), which are composed of equipment (meter modules and equipment for central stations and substations), software and support services. The TWACS systems provide electric utilities with a communication technology for automatic meter reading, load control, interval data, outage assessment/restoration monitoring, remote service disconnect/connect, time-of-use data for critical peak pricing, tamper/theft detection and pre-paid metering. Revenue from the TWACS systems accounted for approximately 22% of the Company�� total revenue in fiscal 2010. Aclara R! F provides, through its STAR network, wireless radio frequency (RF) data communications systems to gas, water and electric utilities for advanced metering infrastructure (AMI) applications. In fiscal 2010, total revenue received by the Company from PG&E for all sales was 9.2% of the Company�� consolidated revenue. Revenue from STAR network products, accounted for approximately 17%, of the Company�� total revenue in fiscal 2010.

Aclara Software Inc. provides utilities with software systems for energy and water information, delivering a scalable meter data management system (MDMS), AMI/meter device records and asset management, business applications addressing areas, such as revenue assurance and distribution asset analysis. Aclara�� analytics-based software applications are used by over 100 energy organizations worldwide. Doble provides electric utility customers with products and services to achieve the reliability and sustainability of electric power infrastructure. It combines three elements for customers: diagnostic test instruments, expert consulting and testing services. Revenue from Doble�� products and services, accounted for approximately 15%, of the Company�� total revenue in fiscal 2010.

TEST

The Test segment accounted for approximately 23% of the Company�� total revenue in fiscal 2010. ETS-Lindgren designs and manufactures products to measure and contain magnetic, electromagnetic and acoustic energy. It supplies customers with a range of isolated environments including RF test enclosures, acoustic test enclosures, RF and magnetically shielded rooms, secure communication facilities and broadcast and recording studios. these facilities include shielded doors and windows. ETS-Lindgren also provides the design, program management, installation and integration services required to complete these types of facilities. ETS-Lindgren also supplies customers with a range of components, including RF absorptive materials, RF filters, active compensatio! n systems! , antennas, antenna masts, turntables and electric and magnetic probes, RF test cells, measurement software and other test accessories required to perform a variety of tests. ETS-Lindgren also offers a variety of services, including calibration for antennas and field probes, chamber certification, field surveys, customer training and a variety of product tests.

FILTRATION

The Filtration segment accounted for approximately 20%, of the Company�� total revenue in fiscal 2010. PTI is a supplier of filtration products serving the commercial aerospace, military aerospace and various industrial markets. The industrial markets include chemical processing, automotive and mobile equipment. Products include filter elements, assemblies, modules, indicators and other related components. VACCO supplies flow control products, valves and filters to the space, defense and commercial industries for use in aircraft, satellite propulsion systems, satellite launch vehicles and other space transportation systems, such as the Space Shuttle and its successor. VACCO also uses its etched disc technology to produce quiet valves and manifolds for the United States Navy applications. Crissair, Inc. supplies a variety of custom and standard valves and other various components to the aerospace, defense and commercial industries. Platform applications include fixed and rotary wing aircraft, air transport and business jets, and defense systems. TekPackaging LLC produces thermoformed products and packaging materials for medical, retail, food and electronic applications.

The Company competes with Itron, Inc., Silver Spring Networks, Landis+Gyr, Cannon Technologies Inc., Sensus Metering Systems Inc., Trilliant Inc., Elster Electricity, L.L.C., Comverge, Inc., Neptune Technology Group, e-Meter Corporation, Oracle Corporation, APOGEE Interactive Inc., Opower, Inc., Ecologic Analytics, LLC, SmartSynch, Inc.,Tantalus Systems Corp, OMICRON Electronics Corp. USA, OMICRON, Megger Group Limited, EM shiel! ding mark! et, TDK RF Solutions Inc., Albatross GmbH, IMEDCO AG, Cuming Corporation, Pall Corporation, Moog, Inc., SoFrance and Clarcor Inc.

Advisors' Opinion:

• [By Travis Hoium]

  What: Shares of engineered product maker ESCO Technologies (NYSE: ESE  ) dropped 10% today after a disappointing earnings report.

  So what: Net sales dropped 4.4% in the fiscal second quarter to $166.2 million, short of the $170.5 million estimate. Earnings per share after adjusting for non-operating charges were $0.28, still below the $0.34 estimate. �

• [By James Miller Phd]

  Pall Corporation (PLL) is a supplier of filtration, separation and purification technologies, principally made by the company, for the removal of solid, liquid and gaseous contaminants from a range of liquids and gases. The company serves customers through two businesses globally: Life Sciences and Industrial. While Pall competes with many companies in the Life Sciences markets and Industrial, few companies operate in both, like ESCO Technologies Inc. (ESE) and Danaher Corp. (DHR).

Top Machinery Companies To Invest In 2014: Eastern Co (EML)

The Eastern Company, incorporated in October, 1912, is engaged in the manufacture and sale of industrial hardware, security products and metal products from four United States operations and six wholly owned foreign subsidiaries. The Company maintains ten physical locations. The Company operates in three segments: Industrial Hardware, Security Products and Metal Products. The Industrial Hardware segment consists of Eberhard Manufacturing, Eberhard Hardware Manufacturing Ltd., Canadian Commercial Vehicles Corporation, Eastern Industrial Ltd. and Sesamee Mexicana, S.A. de C.V. The Security Products segment is made up of Greenwald Industries, Illinois Lock Company/CCL Security Products/Royal Lock, World Lock Company Ltd. and World Security Industries Ltd. The Metal Products segment is based at the Company�� Frazer & Jones facility.

Industrial Hardware

The industrial hardware segment units design, manufacture and market a diverse product line of industrial and vehicular hardware throughout North America. The segment�� locks, latches, hinges, handles, lightweight honeycomb composite structures and related hardware can be found on tractor-trailer trucks, moving vans, off-road construction and farming equipment, school buses, military vehicles and recreational boats. They are also used on pickup trucks, sport utility vehicles and fire and rescue vehicles. In addition, the segment manufactures a selection of fasteners and other closure devices used to secure access doors on various types of industrial equipment, such as metal cabinets, machinery housings and electronic instruments.

Eastern Industrial expands the range of offerings of this segment to include plastic injection molding. Typical products include passenger restraint locks, slam and draw latches, dead bolt latches, compression latches, cam-type vehicular locks, hinges, tool box locks, light-weight sleeper boxes for Class eight trucks and school bus door closure hardware. The products are sold directly to ! original equipment manufacturers and to distributors through a distribution channel consisting of in-house salesmen and outside sales representatives. The industrial segment sells its products to an array of markets, such as the truck, bus and automotive industries, as well as to the industrial equipment, military and marine sectors.

Security Products

The Security Products segment manufactures electronic and mechanical locking devices, both keyed and keyless, for the computer, electronics, vending and gaming industries. The segment also supplies its products to the luggage, furniture, laboratory equipment and commercial laundry industries. Greenwald manufactures and markets coin acceptors and other coin security products used primarily in the commercial laundry markets, as well as hardware and accessories for the appliance industry. In addition, the segment provides a level of security for the access control, municipal parking and vending markets through the use of smart card technology.

Greenwald�� products include timers, drop meters, coin chutes, money boxes, meter cases, smart cards, value transfer stations, smart card readers, card management software, access control units, oven door latches, oven door switches and smoke eliminators. Illinois Lock Company/CCL Security Products/Royal Lock sales include cabinet locks, cam locks, electric switch locks, tubular key locks and combination padlocks. Many of the products are sold under the names SEARCHALERT, PRESTOSEAL, DUO, WARLOCK, SESAMEE, BIG TAG, PRESTOLOCK and HUSKI. These products are sold to original equipment manufacturers, distributors, route operators and locksmiths.

Metal Products

The Metal Products segment produces expansion shells for use in supporting the roofs of underground mines. This segment also manufactures specialty malleable and ductile iron castings. Typical products include mine roof support anchors, couplers for railroad braking systems, adjustable clamps for con! struction! and fittings for electrical installations. Mine roof support anchors are sold to distributors and directly to mines, while specialty castings are sold to original equipment manufacturers.

Advisors' Opinion:

• [By Sally Jones]

  Eastern Co. (EML) - Market Cap $96.49 Million

  Eastern Co. is down 16% over 12 months. The company has a market cap of $96.49 million; its trades at around $15.55 with a P/E ratio of 13.60 and a P/B ratio of 1.30.

Top Machinery Companies To Invest In 2014: Katy Industries Inc (KATY)

Katy Industries, Inc. (Katy) is a manufacturer, importer and distributor of commercial cleaning and storage products. The Company�� commercial cleaning products are sold primarily to janitorial/sanitary and foodservice distributors that supply end users, such as restaurants, hotels, healthcare facilities and schools. The Company�� storage products are primarily sold through home improvement and mass market retail outlets. Continental Commercial Products, LLC (CCP) is its wholly owned subsidiary and includes as divisions all of its business units. The Company�� business units are Continental, Contico, Container, Gemtex, Glit and Wilen. On October 4, 2011, the Company sold all assets and certain liabilities related to the DISCO division of CCP to DISCO Acquisition Corp. In February 2014, Katy Industries Inc completed the acquisition of Fort Wayne Plastics, Inc.

The Continental business unit is a plastics manufacturer and an importer and distributor of products for the commercial janitorial/sanitary maintenance, industrial and food service markets. Continental products include commercial waste receptacles, buckets, mop wringers, janitorial carts, and other products designed for commercial cleaning and food service. Continental products are sold under the brand names, such as Continental, Kleen Aire, Huskee, SuperKan, King Kan, Unibody, Tilt-N-Wheel, Wall Hugger, Collossus, Corner��Round, Rountop, Swingline, Kleen Tech and Structo Tuff.

The Contico business unit is a plastics manufacturer and distributor of home and tool storage products, sold primarily through home improvement and mass market retail outlets. Contico products include plastic home storage units, such as domestic storage containers, tool boxes, shelving and hard plastic gun cases and are sold under the brand names Contico and Tuffbin. Contico is a registered trademark used under license from Contico Manufacturing Limited.

The Container business unit is a plastics manufacturer and distributor ! of industrial storage drums and pails for commercial and industrial use. Products are sold under the Contico and Contico Container brand names.

The Gemtex business unit is a manufacturer and distributor of resin fiber disks and other coated abrasives for the original equipment manufacturer (OEM), automotive, industrial and home improvement markets. Gemtex products are sold under the brand names Trim-Kut and Grind R.

The Glit business unit is a manufacturer and distributor of non-woven abrasive products for commercial and industrial use and also supplies materials to various OEMs. Glit non-woven products include floor maintenance pads, hand pads, scouring pads, specialty abrasives for cleaning and finishing, growth medium and roof ventilation products. These products are sold primarily in the commercial sanitary maintenance, food service, industrial and construction markets under the brand names, such as Glit, Kleenfast, Glit/Microtron, Fiber Naturals, Blue Ice, Brillo, Cyclone, Cyclone D, Sponge Pro, Wipe Clean Pro, Joey, Jackeroo, Buckaroo, Cocopad, Safire and WalnutPad. Brillo is a registered trademark used under license from Armaly Brands, Inc. and BAB-O is a registered trademark used under license from Fitzpatrick Bros., Inc.

The Wilen business unit is a manufacturer, importer and distributor of professional cleaning products that include mops, brooms, brushes and plastic cleaning accessories. Wilen products are sold primarily through commercial sanitary maintenance, industrial and food service markets, with some products sold through consumer retail outlets. Products are sold under the brand names, such as Wilen, Wax-o-matic, Rototech, ErgoWorx and Derma-Tek.

Advisors' Opinion:

• [By Chris Mydlo]

  The guru, Mario Gabelli, purchased 724,729 shares of Katy Industries (KATY). According to the 13D filed with the SEC on March 21, 2014, Gabelli is deemed to have beneficial ownership of the securities owned by Gabelli Funds, GAMCO, Teton Advisors and MJG Associates. The total amount of shares owned is 1,711,045, representing 21.52% of the shares outstanding. Katy engages in the manufacture, import and distribution of commercial cleaning and storage products for commercial janitorial/sanitary maintenance, industrial, foodservice, mass merchant retail and home improvement markets in the U.S., Canada and Europe.

Top Machinery Companies To Invest In 2014: Mueller Industries Inc (MLI)

Mueller Industries, Inc., incorporated on October 03, 1990, is a manufacturer of copper, brass, plastic, and aluminum products. The Company�� products include copper tube and fittings; brass and copper alloy rod, bar, and shapes; aluminum and brass forgings; aluminum and copper impact extrusions; plastic pipe, fittings and valves; refrigeration valves and fittings; fabricated tubular products; and steel nipples. The Company also resells imported brass and plastic plumbing valves, malleable iron fittings, faucets and plumbing specialty products. Mueller�� operations are located throughout the United States and in Canada, Mexico, Great Britain, and China. The Company has two segments: the Plumbing & Refrigeration segment and the Original Equipment Manufacturers (OEM) segment. The Plumbing & Refrigeration segment is composed of the Standard Products Division (SPD), European Operations, and Mexican Operations. The OEM segment is composed of the Industrial Products Division (IPD), Engineered Products Division (EPD), and Jiangsu Mueller-Xingrong Copper Industries Limited (Mueller-Xingrong), the Company�� Chinese joint venture. On August 16, 2012, the Company acquired 100% of the stock of Westermeyer Industries, Inc. (Westermeyer), located in Bluffs, Illinois. Westermeyer designs, manufactures, and distributes high-pressure components and accessories for the air-conditioning and refrigeration markets. In October 2013, Commercial Metals Company completed the sale of Howell Metal Company, to Mueller Copper Tube Products, Inc., a subsidiary of Mueller Industries, Inc.

Plumbing & Refrigeration segment

SPD manufactures and sells copper tube, copper and plastic fittings, plastic pipe, and valves in North America and sources products for import distribution in North America. European Operations manufacture copper tube in Europe, which is sold in Europe and the Middle East; activities also include import distribution in the United Kingdom and Ireland. Mexican Operations consist of pi! pe nipple manufacturing and import distribution businesses, including product lines of malleable iron fittings and other plumbing specialties. The Plumbing & Refrigeration segment sells products to wholesalers in the heating, ventilation, and air-conditioning (HVAC), plumbing, and refrigeration markets, to distributors to the manufactured housing and recreational vehicle industries, and to building material retailers.

Mueller�� Plumbing & Refrigeration segment includes SPD, which manufactures a line of copper tube, in sizes ranging from 1/8 inch to eight inch diameter, which are sold in various straight lengths and coils. Mueller is in the air-conditioning and refrigeration service tube markets. In addition, Mueller supplies a variety of water tube in straight lengths and coils used for plumbing applications in virtually every type of construction project. SPD also manufactures copper and plastic fittings and related components for the plumbing and heating industry that are used in water distribution systems, heating systems, air-conditioning, and refrigeration applications, and drainage, waste, and vent systems. SPD�� products are used in the domestic residential and commercial construction markets. The Plumbing & Refrigeration segment also fabricates steel pipe nipples and resells imported brass and plastic plumbing valves, malleable iron fittings, faucets, and plumbing specialty products to plumbing wholesalers, distributors to the manufactured housing and recreational vehicle industries and building materials retailers.

The Company competes with Cerro Flow Products, Inc., Cambridge-Lee Industries LLC , Wolverine Tube, Inc., KobeWieland Copper Products LLC, Howell Metal Company, Elkhart Products Company, NIBCO, Inc. and Charlotte Pipe & Foundry.

OEM segment

The OEM segment manufactures and sells brass and copper alloy rod, bar, and shapes; aluminum and brass forgings; aluminum and copper impact extrusions; refrigeration valves and fittings; fabr! icated tu! bular products, and gas valves and assemblies. Mueller-Xingrong manufactures engineered copper tube primarily for air-conditioning applications. The products are sold primarily to OEMs located in China. The OEM segment sells its products primarily to original equipment manufacturers, many of which are in the HVAC, plumbing, and refrigeration markets.

Mueller�� OEM segment includes IPD, which manufactures brass rod, nonferrous forgings, and impact extrusions that are sold primarily to OEMs in the plumbing, refrigeration, fluid power, and automotive industries, as well as to other manufacturers and distributors. The Company extrudes brass, bronze and copper alloy rod in sizes ranging from 3/8 inches to four inches in diameter. These alloys are used in applications that require a high degree of machinability, wear and corrosion resistance, as well as electrical conductivity. IPD also manufactures brass and aluminum forgings, which are used in a variety of products, including automotive components, brass fittings, industrial machinery, valve bodies, gear blanks, and computer hardware. IPD also serves the automotive, military ordnance, aerospace, and general manufacturing industries with cold-formed aluminum and copper impact extrusions. The OEM segment also includes EPD, which manufactures and fabricates valves and custom OEM products for refrigeration and air-conditioning, gas appliance, and barbecue grill applications. In addition, EPD manufactures shaped and formed tube, produced to tight tolerances, for baseboard heating, appliances, and medical instruments.

The Company competes with Chase Brass and Copper Company.

Advisors' Opinion:

• [By Seth Jayson]

  Mueller Industries (NYSE: MLI  ) reported earnings on July 23. Here are the numbers you need to know.

  The 10-second takeaway
  For the quarter ended June 29 (Q2), Mueller Industries met expectations on revenues and beat expectations on earnings per share.

• [By Neil Macneale]

  Among the potential addition to our portfolio, Mueller Industries (MLI) may seem among the least likely. It�� a very small-cap company ($1.8B) and it�� not very well known (covered by only two analysts).

• [By Ben Levisohn]

  The iShares Russell 2000 ETF (IWM) has dropped 5.2% so far this year, while Mueller Industries (MLI), which has plunged 55%, Medidata Solutions (MDSO), which has plummeted 44%, Financial Engines (FNGN), which has slid 42%, and Isis Pharmaceuticals (ISIS), which has tumbled 42%, are the index’s biggest losers.

Top Machinery Companies To Invest In 2014: Danieli & C Officine Meccaniche SpA (DAS)

Danieli & C Officine Meccaniche SpA is an Italy-based company primarily engaged in industrial sector. The Company designs, manufactures, sales and makes installation of machines and plants for the metallurgical industry. The Company's portfolio includes mines; pellet production plants; blast furnaces; direct reduction equipment; machinery for the treatment of scrap metal; steelworks for production of liquid steel; continuous casting machinery for blooms, billets and slabs; rolling mills for long products, seamless tubes and flat products; production lines for welded tubes and flat products; plants for secondary processing, such as peeling, rolling and drawing; forging presses and manipulators; extrusion presses for ferrous and non-ferrous metals; plants for longitudinal and transversal cutting; automation and control systems, and cranes and lifting equipment. It is also active in the production and sale of special steel for automotive, machine tools and railway industry, among others. Advisors' Opinion:

• [By Damian Illia]

  Crown Castle has acquired recently the privately held company NextG Networks Inc., largest provider of outdoor Distributed Antenna Systems (DAS), with more than 7,000 DAS plus another 1,500 nodes in the pipeline, and over 4,600 miles fiber-optic cable�� transmission rights. Through this addition, the company has improved greatly its DAS network across 26 United States metropolitan areas. As NextG has only 1.7 tenants per network on an average and thus underutilizing its capacity, Crown Castle will increase customers with no integration and rearrangement costs. Another company�� big move was the acquisition of 9,700 wireless towers from AT&T Inc. (T) Located in the top 100 markets in the U. S. T-Mobile is likely to maintain its infrastructure in these towers for the next 10 years. On top of all, the recent conversion of business into a REIT has represented long term benefits for the company in terms of tax savings and enhancing shareholders��wealth.

• [By GURUFOCUS]

  EMC�� products ��both hardware and software - are litearlly a geek�� wonderland alphabet soup, which include Storage Area Network (SAN), Network Attached Storage (NAS), Direct Attached Storage (DAS), Virtual SAN, All-Flash XtremIO, Atmos, Avamar, �Data Domain, Isilon, Pivotal, ViPR Software Defined Storgae, VMAX, VNX, VNXe, VPLEX, VSPEX (none of these are typos).� Information storage makes up 70% of revenues and virtualization 23% of revenues.� Products generate 55% of revenues.� Services generate 45% of revenues.� The Company�� gross profit split is approximaltey 67% data storage and 31% virtualization.

Top Machinery Companies To Invest In 2014: Cummins Inc.(CMI)

Cummins Inc. designs, manufactures, distributes, and services diesel and natural gas engines, electric power generation systems, and engine-related component products worldwide. It operates in four segments: Engine, Power Generation, Components, and Distribution. The Engine segment offers a range of diesel and natural gas powered engines under the Cummins and other customer brand names for the heavy-and medium-duty truck, bus, recreational vehicle, light-duty automotive, agricultural, construction, mining, marine, oil and gas, rail, and governmental equipment markets. This segment also provides new parts and service, as well as remanufactured parts and engines. The Power Generation segment offers power generation systems, components, and services, including diesel, natural gas, gasoline, and alternative-fuel electrical generator sets for use in recreational vehicles, commercial vehicles, recreational marine applications, and home stand-by or residential applications. This segment also provides components that make up power generation systems, such as engines, controls, alternators, transfer switches, and switchgears. The Components segment supplies filtration products, turbochargers, aftertreatment systems, intake and exhaust systems, and fuel systems for commercial diesel applications. This segment offers filtration and exhaust systems for on-and off-highway heavy-duty and mid-range equipment, as well as supplies filtration products for industrial and passenger car applications. This segment also develops after treatment and exhaust systems to help customers meet emissions standards and fuel systems. The Distribution segment provides parts and services, as well as service solutions, including maintenance contracts, engineering services, and integrated products. The company sells its products to original equipment manufacturers, distributors, and other customers. Cummins Inc. was founded in 1919 and is headquartered in Columbus, Indiana.

Advisors' Opinion:

• [By Eric Volkman]

  Cummins (NYSE: CMI  ) has decided to inject a little power into its payout. The company has lifted its dividend, declaring a distribution of $0.625 per share to be paid on Sept. 3 to shareholders of record as of Aug. 22. That amount is $0.125, or 25%, higher than the firm's previous disbursement of $0.50 paid in early June.